What is a smoke purifier? Where is the application?

Through the gravitational action of the fan, the welding fumes are sucked into the air inlet of the device through the universal suction hood, and the flame arrester is arranged at the air inlet of the device, the spark is blocked by the flame arrester, the soot gas enters the settling chamber, and the gravity and the upward airflow are used first. The coarse dust is directly reduced to the ash bucket, and the particulate soot is trapped on the outer surface by the filter element. After the clean gas is filtered and purified by the filter element, the filter element flows into the clean room, and the clean air is further purified by the activated carbon filter and discharged through the air outlet. . Applicable to arc welding, carbon dioxide protection welding, MAG welding, carbon arc gas welding, gas fusion cutting, welding and other workplaces that generate smoke.
   At present, the development direction of the application of smoke purification equipment technology should be positioned to further improve the product function, increase the technical content of the product, and strive to minimize the daily maintenance during the operation process and ensure the stability of operation. Changing the status quo of smoke control can start from the following three aspects:
   At present, a small number of smoke purification equipment production plants lack engineering and technical personnel, and do not understand the engineering problems of the application of smoke purification equipment. If it is not possible to finalize the reasonable pipeline design, equipment selection, fan (pump) matching selection, fan vibration reduction, sound insulation measures, etc., it can not provide users with complete service of smoke purification, affecting the normal operation and purification of equipment. fruit. In practical applications, there are large wind turbines equipped with small equipment (the flue gas flow rate is too fast, the residence time is short, resulting in a decrease in purification efficiency) or the small fan is equipped with large equipment (resulting in poor exhaust). The purification results of the smoke purifier should not be regarded as just a problem of the smoke purification equipment, but an engineering problem. The application level of the smoke purification equipment should be continuously increased by increasing the level of engineering.
    Most of the current smoke purification technologies applied in the market can meet the requirements of environmental protection regulations and standards, but they also show problems such as too many manufacturers, small production scale, low technical content, and unfair competition in the market. It is necessary to further increase the smoke emission standards and technical requirements for product certification, and to standardize and guide the market by increasing the performance indicators of smoke purification equipment (such as purification efficiency, resistance, VOC index requirements, etc.). Website: www.jl2e9.cn

Products Recommended

BCB-M600

BCB-M1000

Bamboo tube

hose